How to Scrape Wax off Your Snowboard: The Right Way

Scraping your snowboard is the most overlooked step of applying fresh wax. Get your board waxed the right way and get a silky smooth ride!

Wax scrap

Waxing your snowboard is essential for keeping it in peak condition. However, if you don't take the time and effort to scrape off excess wax after adding new wax, you can end up with a sticky buildup of wax that's difficult to remove. Fortunately, there are ways you can effectively scrape that wax off your board without damaging it.

Choose the Right Scraper

The first step in scraping wax off your snowboard is choosing the right scraper. You'll want to use a wide plastic or metal scraper that won't damage your board's base or edges. Plastic scrapers are relatively inexpensive and great for removing large chunks of wax, but they may not be as effective at getting rid of the last layer of wax.

Metal scrapers will do a better job at removing everything, but they can cause damage if you're not careful. So if you opt for a metal scraper, be sure to keep it away from any sensitive parts of your board like the edges.

Start Scraping from the Tip and Tail

Once you've chosen your scraper, start scraping from the tip to the tail of your board. This will help prevent any unnecessary scratches or gouges on your board due to back-and-forth movement when scraping around curves or tight corners.

It's also important to make sure that you're applying even pressure throughout the process so that no one area gets more pressure than another—this could cause damage to sensitive parts of your board like its base or edges.

Use a Polish Brush

Polishing a snowboard after scraping off the wax is important for a smooth ride. A great way of achieving that perfect finish is by using a snowboard brush. Once you've used a scraper to remove the wax, use the brush in long strokes to create a polish finish that will glide easily across the snow.

When brushing your board, start from the tip of the board and brush towards the tail. As you go along, your wax job should become smoother with each stroke and eventually you'll have a really nice sheen. Not to mention, it will give you superior glide over other riders who forget about this important maintenance step!


Scraping old wax off your snowboard may seem like an arduous task, but with the right tools and techniques it's easy! Just make sure you choose a wide plastic or metal scraper that won't damage any sensitive parts of your board like its base or edges; start at the tip and tail; apply even pressure; and lastly give a good polish! If done correctly, scraping off old wax should leave behind a smooth surface ready for fresh snow!

Check out some of the best snowboard scrapers below:

If you liked this article check out our related content below:

Winter is Coming, Get the Best Snowboard Stomp Pad (Top 4)
Snowboarding is a great way to get around outdoors. With the right snowboard stomp pad, you can make sure that your feet stay firmly planted.
The Best Snowboard Gloves with Wrist Guards Out There
Snowboarders know that the right gear is essential. It’s important to find gloves with wrist guards that can keep your hands warm and protected.
Where to Place a Stomp Pad on a Snowboard
Placement of the stomp pad on your snowboard is key. We unpack everything you need to know to get you started.